Two Installation Methods: Punched, Non-punched

Drilling Installation Steps: 1, Assemble long and short horizontal bars and screw them on; 2, Choose the right wall and mark the location of the screws; 3, Drill with 8MM bit and hammer the white rubber plug into the hole; 4, Align the frame with the screw holes, and tighten the 4 holes with screws; 5, Snap one side of the basket into the hole firstly, and then snap in the other side; 6, After you have hung all the accessories, you can place dishes, chopping boards, knives, etc.

Tips: Use non-perforated installation, be sure to wait 72 hours before using

Non Drilling Installation Steps: 1, Assemble long and short horizontal bars and screw them on; 2, Select a suitable wall and mark the installation location; 3, Apply nail-free glue evenly on the back of the frame (note that the wall must be clean, dry and dust-free); 4, After aligning with the marked position, paste it on the wall, press it firmly for 30 seconds, press the glue evenly, attach the auxiliary sticker, and wait for 72 hours; 5, After 72 hours, place the basket into the bracket of the shelf; 6, Hang up other accessories, installation is complete.